DOUBLE SEALING STATION THERMOFORMING MACHINES

Rotating 10 "color touch screen

39 programs for different products to be packaged

Infinite incident detection alarms

Output connections for printers, dispensers, etc.

Chains with normal, smooth and very smooth start and stop for liquids

Split advances x1 x2 x3 x4 and asymmetric

Anti-condensation resistance in electrical panel

Good looking packaging counter

Negative counter for bad packaging in sight

Cycle speed minute at sight

On-screen user menu

On-screen menu for maintainer

Chain advance with 70 different speeds

Selection of the number of advances for each gait pulse

Push button for manual entry of the lower film by pulses or continuous

Scrap break detector

Vacuum test

End of cycle in advance or in container

General switch and cable identification according to CE standards

Nickel plated chains with stainless steel clips and springs

High performance servo-motor chain drive

Maximum upper coil diameter 350mm (standard)

Bottom coil diameter 400mm (standard)

Spool holder adapted to 76 mm 3 "chuck

Motorized upper and lower spool holder

Upper and lower spool holder with lateral adjustment

Direct vacuum on the container

Vacuum by millibars, time and intermittent with progression

Cylinder activated welding with air pressure + vacuum

Perimeter welding to avoid heating the product

Easy-open in containers in the place to be determined

Frame - easy-change weld grill inside drawer

Container outlet by height-adjustable roller ramp

Separate and regulated ventilation in vacuum and forming forms

Scrap evacuation by moto-drums

Scrap cleaner stuck in return chain

Chocks for different container forming heights

cross-section

Longitudinal cut

Thermoforming by compressed air pressure

Ease of mold changes

Loading area with supports for light packaging

Robust stainless steel chassis with sanitary hygienic design

Side doors with easy access to maintenance

Level and height adjustment legs of the machine

Water circuit cooling

Water circuit with drain valve for mold change

Boiler tank with compressed air reserve

Lifting of lasts by cylinder-operated levers

Design for quick and easy maintenance

Ip65 watertight general panel divided into two, electronic and pneumatic

Safety protections according to CE standards.

Safety protections in stainless steel and methacrylate

Maximum standard thermoforming height 120mm

Filtering impurities before electro-valves

Shock absorber for high speeds on lasts

Compressed air noise silencers

Compressed air purifying filter in formed

Last closing adjustment by regulators

Upper and lower film detector

Last closing cleaning program

* Total width approx 930mm

* Total length depends on advances and load zones

* Total height from 1700 to 1800mm adjustable with legs

* Total weight 1400 kg approx. depends on equipment

* Load zones to choose the number of cycles

* Electrical connection (5 poles) - (3 phases + n + t)