Thermoformer OC
Thermoformer OC
ANY MEASUREMENT (OPTIONAL)
Measurements: |
Forming depth: |
Production per hour: |
Reel evacuation |
Rework vacuum option |
PACKAGING FORMS
PACKAGING EXAMPLE
TYPES OF MACHINERY
GENERAL CHARACTERISTICS
5.7" color touchscreen |
6 programs for different products to be packaged |
Infinite alarms for incident detection |
Chains with normal, soft start and very soft stop for liquids |
Split advances x1 x2 x3 |
Anti-condensation resistance in electrical panel |
Cycles per minute speed in sight |
On-screen menu for user |
On-screen menu for maintenance manager |
Chains advance with 70 different speeds |
Button for manual entry of lower film by pulses or continuous |
Vacuum test |
Container counter in sight |
Main switch and cable identification according to CE standards |
Nickel-plated chains with stainless steel clamps and springs |
Chains driven by high-performance servo motor |
Maximum upper coil diameter 350 mm (standard) |
Lower coil diameter 400 mm (standard) |
Reel holder adapted to 76 mm 3" mandrel |
Direct vacuum in the container |
Vacuum by millibars, time and intermittent with progression |
Welding activated by cylinder with air pressure + vacuum |
Total welding |
Easy-openings in the containers in the determined place |
Easy-change welding grid frame inside drawer |
Container exit by height adjustable ramp |
.
Separate and regulated ventilation in vacuum and forming molds |
Free-fall rework evacuation |
Cleaner for stuck waste in return chain |
Shims for different forming heights of the containers |
Cross-cut |
Longitudinal cut |
Thermoforming by compressed air pressure |
Ease in mold changes |
Loading area with supports for light containers |
Robust stainless steel frame with hygienic sanitary design |
Side doors for easy maintenance access |
Level and machine height adjustment legs |
Water circuit cooling |
Water circuit with vacuum valve for mold change |
Mold elevation by levers driven by cylinder |
Quick and easy maintenance design |
IP65 sealed general panel divided into two, electronic and pneumatic |
Safety protections according to CE standards. |
Safety protections in stainless steel and methacrylate |
Standard maximum forming height 120 mm |
Impurity filter before solenoid valves |
Shock absorber for high-speed molds |
Noise silencers in compressed air |
Compressed air purifier filter in forming |
Mold closure adjustment by regulators |
OPTIONAL FEATURES
|
|
|
|
|
|
.
|
|
|
|
|
TECHNICAL SPECIFICATIONS
|
Total length depends on advances and loading areas |
|
|
|
.
|
|
|
|
|
|
INDIVIDUALLY BUILT FOR YOU
TECSELOR, S.L. RESERVES THE RIGHT TO MODIFY TOTAL OR PARTIALLY (WITHOUT PRIOR NOTICE) ANY OF THE DATA AND SPECIFICATIONS APPEARING IN THIS CATALOG.